How to make origami dinosaurs - designing and assembling dinosaurs with children

Origami is loved by adults and children around the world. But it can be difficult to choose a model that will be interesting to all. One such product - paper dinosaurs.

Colorful dinosaurs like girls and boys of all ages. We offer you some simple schemes for the assembly of three-dimensional origami dinosaurs out of paper.

The easiest dinosaur

To create such a craft, arm yourself with dense double-sided colored paper or special raw material for oriental crafts. Then do the following steps:

1. Cut out a square;
2. Fold it once at an angle;
3. Place the sheet at an angle to you;
4. Bend the right corner to the middle, so that the face of the diamond lay on the central axis;
5. Repeat on the left;
6. Fold to the center of the two upper corners;
7. Bend the top part, getting the mountain;
8. Turn the workpiece;
9. Acute angle of the design lift, hiding the base in the resulting folds of the base;
10. The top of the neck press down, forming a head;
11. Fold the bottom corner of the base, you get a tail;
12. Draw the dinosaur eyes.

Velociraptor origami

If you do not know how to make origami dinosaur paper, arm yourself with the description of the scheme Velociraptor and heavy paper.

The procedure is as follows:

1. A square of the basis of the fold twice in half and twice along the diagonals;
2. Fold the workpiece on the resulting lines in a double rhombus;
3. Angles of the diamond with each side to bend to the center;
4. Unfold the figure across;
5. The upper corners to hide inside;
6. Both peaks on each side of the tuck;
7. Lower large corners on both sides lift up;
8. And the upper corners down;
9. At the bottom should be "pants;
10. The right "pant" raise and pull to the right;
11. The top "pant leg" fold to the center;
12. The upper half of the design bend down and away, forming a triangular wing;
13. "Left leg" raise and halfway down, it will be the head.
14. We got a flying dinosaur - pterodactyl. Those who are already bored with this activity can stop at this stage, and the most patient masters can continue. If you want to make a velociraptor, continue:
15. The wings need to lift up and duck down;
16. Part of the body - a triangle at the base move up, it will be the neck;
17. On the sides of the neck do two folds, you get a short forelegs;
18. The upper part of the neck once, take once, we have the head.

Herbivore dinosaur

Since we have already figured out how to make a predatory lizard, let's figure out how to make origami dinosaur-vegetarian. To work you need to cut a square of colored dense base, measuring 21 by 21 cm. The next step is to:

1. Bend it twice diagonally;
2. Bend one of the corners to the central axis, bend;
3. Repeat with a neighboring facet of the square;
4. Repeat with the remaining two sides;
5. Two adjacent faces simultaneously bend to the center so that between them formed a standing figure vertically. It needs to bend to the left;
6. Repeat with the opposite sides of the sheet, a triangle bend to the right, so that both small polygons are adjacent to each other;
7. The upper parts of the diamond, from which depart "offshoots" to bend toward the central axis;
8. Expand the handicraft perpendicularly;
9. Right corner of the bend to the center up, away, bend down;
10. Longer corner of the fold a little less than half, duck;
11. Fold the paper along these lines to obtain a standing vertically volumetric figure, smooth it;
12. Unfold the craft of the wrong side;
13. Large lower triangle lift up;
14. Upper acute angle bend to the center;
15. Bottom bend to the center, the top of the resulting triangle bend down;
16. Repeat on the second side;
17. The whole resulting structure fold in half. Should go long torso and two wings;
18. A wing bend down;
19. His left corner down again;
20. The right corner also lower, to form an accordion. Should get two separately standing paws;
21. Duplicate on the other side of the design;
22. Front part of lift up, forming a crease;
23. Take away the edge twice, so that it came out rounded little head;
24. Since the sides of the dinosaur can separate, you can glue the craft with PVA glue along the back.

Triceratops .

To create a rhinoceros progenitor, bend a square piece of paper diagonally and in half, then do the following:

1. Bring the bottom and top of the square down to the center line, unfold, and flip the sheet 90 degrees;
2. Repeat step 1;
3. Leave one bottom edge tucked;
4. Fold to the center of the right and left halves;
5. The upper corners of the rectangle fold to the center, forming an arrow;
6. Fold back, bend so that at the top of the rectangle formed a diamond;
7. High angle of the diamond take to the center;
8. Fold back, bend it to the left, then to the right;
9. Gather the lines, you get a protruding triangle;
10. The lower right edge of the diamond bend upward, then left;
11. Fold along the lines, it will be a vertical horn;
12. Make a second horn;
13. The top layer of a rectangle at the base of the triangles on the sides;
14. Arrange the design so that the bottom was a trapezoid;
15. Corners of the trapezoid pressed down and folded in half;
16. Expand the triangles on the sides;
17. Turn the workpiece;
18. Fold in half twice along the lines of folds;
19. The second square sheet base fold aslant and in half;
20. One corner of the bend is not reaching the middle of the straight line of the fold;
21. The second bend to the resulting oblique line. Should get a triangular shape, similar to an ice cream cone;
22. Top bring down to the point of intersection of the two folds and turn inside out;
23. Turn the structure;
24. Draw a straight line from the corner of the triangle to the middle of the figure. Fold the sheet along this line;
25. Unfold the sheet and fold into an accordion, forming the back and sides of the lizard;
26. Fold across in half;
27. Fold the sides along the lines to isosceles triangles, one apex of each turn to the left;
28. Connect the head and torso triceratops.

If a verbal description and pictures are not enough to understand the whole process, you can always find video instructions on the Internet. They may well replace the visit of the real master class on origami.

It is important to remember that, regardless of the scheme chosen, it is better to use a craft is dense paper and be sure to carefully smooth out all the folds on the future craft. So the finished figure will be more durable and stable. And if you want it can be painted or colored with a child.

Models of origami dinosaurs are probably almost as many as there were species of real ancient animals. Choose a scheme for their level of difficulty, depending on your skills and the availability of free time.

Photo ideas homemade dinosaurs in the art of origami