How to make a drinker for chickens with their own hands - types of drinkers, the stages of creation, useful tips

People have been breeding animals for personal purposes for thousands of years. Even in today's realities, poultry farming is still a relevant activity. Poultry farming - it is always available, environmentally friendly meat and eggs, as well as affordable and high-quality fertilizer for the garden.

In order to make the livestock feel comfortable, you need to pay careful attention to the organization of the poultry yard. So, in addition to food, the hen must have constant access to fresh water. Dehydration can affect the bird extremely negatively.

Requirements for the pond

First of all, a chicken drinker must meet certain criteria in order to maintain the health of the animals, their normal growth and longevity.

Safety. It is necessary to think about the fact that the hen could not hurt himself on the protruding parts or sharp edges. Making drinkers for chickens with their own hands should choose a safe material that will not form compounds that are dangerous to the health of the animal.
Reliability and stability. Drinking bowl installed in a cage or aviary can cause interest in the bird and be overturned accidentally, or as a result of an attack. Therefore, the container should be made of a material with a reserve of strength, as well as securely fastened in the cage.
Ease of use. Poultry drinker should be designed so that both the bird can easily reach the drinker and it is easy to fill it with water or, for example, to connect a water pipe.
Cleanliness. The water can be a breeding ground for various microorganisms, which is dangerous for birds. Therefore, the drinker must be protected from any debris.

Usage. Recommendations .

A hen consumes an average of 500 ml of water per day. But this volume may vary depending on the age and sex of the animal, the ambient temperature and the amount of food consumed. Chickens require almost a liter of water per day.

While there is a wide variety of drinkers, there are 6 main types. In addition, simple cups, pots or small buckets can also be used as drinkers. But this method has significant disadvantages, for example, the bird easily overturns the container and risks for a long time to remain without water or contaminate the existing one.

Bowl (drip).

This is an open drinker of small size. It is more suitable for young birds. The most budget-friendly option is to use a small bowl or cup made of materials at hand. But the cheap version can only be called temporary, because such a drinker is difficult to fix correctly, and the drinker will run out of water unexpectedly.

To make the construction more reliable an ordinary plastic bottle will help. Need to make the bottle, a volume of two and a half to five liters a small hole, keeping the indentation from the neck about 15 centimeters. The bottom is completely cut off - through him to pour water into the drinker. The lid of the bottle with the fasteners attached to a bowl or flask. Fill the drinker with water until the water reaches the edge of the bowl.

Plastic pipe drinker

A good and more reliable container can be made from an ordinary water pipe.This design is more stable and safe.

Elongated cuts of 15-20 centimeters are made. The distance between adjacent holes is at least 5-10 centimeters, with at least 15-20 centimeters to the edge of the pipe. Carefully work the hole so that no sharp edges are left. The ends of the pipe are plugged and will need to be removed when filling or draining the drinker.

Vacuum

This is an improved version of the cup drinker. To make it, you will need two plastic containers of 6 and 2 liters. You need to cut the 5-liter bowl along the first corrugation like a bowl. A 2-liter bowl, necessarily smaller in diameter, to turn it upside down.

Make holes in the caps with a diameter of no more than 1 centimeter and fasten both caps with bolts. Make a hole in the smaller bottle at a distance of 7-10 centimeters from the cap. Put the bowl on top of the smaller diameter bottle and invert the construction. Fill.

So, water will flow into the bowl as needed through small holes. Such a drinker is better to fix it firmly with clamps or wire. The main goal is to prevent the hen from turning it over.

Siphonic

Ideal for small livestock. How to make a drinker for chickens with my own hands? Choose a deep rimmed dish and a five-liter plastic container.

Make holes in the bottom of the bottle so that they are not higher than the rim of the bowl. The bottle should be turned upside down, covering the holes with your fingers, and then fill with water. The liquid will flow out of the opening, but will stop once it reaches the rim of the bowl. In this case, the amount of water will remain constant. If the amount of water decreases, the bowl will again fill with water from the grooves when the air pressure is changed.

Autoshelf using nipples

One of the best options. It is safe, stable and meets all hygienic requirements. There are different variations of drinkers of this form.

The simplest of them is an ordinary hanging bucket, in the bottom of which the nipples are screwed in. Usually four holes are made. The main disadvantage is that this drinker is filled by hand, but a definite plus is that it is easy to clean. Therefore, a nipple drinker, connected to large bottles, and sometimes even to the water line, is more common.

Purchase a flexible pipe about 20-22mm, plugs, adapters and cutting tools. It is necessary to make marks on the bucket under the places of connection nipples - the distance between adjacent holes should be up to 15 centimeters. A hole is made, the end is closed. Plug one end, and on the other put the adapter. After the nipples are attached, then - the system is connected to the water source.

Fix the drinker can be easily with a wire. The best - to attach it to the wall, winding it on the elements of the fence.

Simple from a plastic bucket

This is the easiest and fastest way to make a drinker for the chicken with their own hands.

You will need an undamaged bucket and a large tray, for example, for flowers.

You should check beforehand that the diameter of the tray is larger than the diameter of the bucket.

Turning away from the top edge by 1-2 centimeters, tiny holes are made along the rim, the optimal number is two. The finished drinker is filled, covered with a tray and turned upside down.

From the holes in the tray, water will begin to flow out and collect at the bottom. When it reaches the level of the rim, it will stop. As the birds begin to drink and the amount of water in the tray will decrease - it will flow out of the holes in the bucket again.There are many options for drinkers for chickens with their own hands original ideas with photos will help to choose the appropriate form and complexity of performance.